Skip to main content

Parallel shift

Matt
  • Updated

In Winner, users can move a wall, or offset, a line or an edge in a parallel direction. This is useful for making a room larger without deleting any external walls, extending a worktop or adjusting the dimensions of an interior wall. The method differs dependent on whether the line or edge being moved is part of a worktop, a filler, a sectional view, an interior (false) wall or an external wall.

 

Worktop

At Alternative level, in Furnishing mode:

  1. Click the Draw/edit worktop icon:

    draw_edit_worktop.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the worktop edge.

  4. Right-click the selected worktop edge and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimetres (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

At Alternative level, in Worktop scheme mode:

  1. Left-click to select the worktop edge.

  2. Right-click and select Parallel shift. 

  3. In the Parallel shift line dialogue box, enter a value in millimetres (mm).
    Note: Entering a + or - will determine the direction of the shift.

  4. Click OK.

 

Filler

At Alternative level, in Furnishing mode:

  1. Click the Free drawing of filler icon:

    Free_drawing_of_filler.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the filler edge.

  4. Right-click the selected filler edge and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimetres (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

Sectional view

At Alternative level, in Furnishing mode:

  1. Click the Draw/alter sectional view icon:

    EditSectionalView64.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the sectional view line.

  4. Right-click the selected sectional view line and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimetres (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

Interior (false) wall

At Alternative level, in Room definition mode or Furnishing mode:

  1. Click the Draw interior wall icon:

    Draw_interior_wall.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the interior wall edge.

  4. Right-click the selected interior wall edge edge and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimetres (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

External wall

At Alternative level, in Room definition mode:

  1. Left-click to select the external wall.

  2. Right-click the selected external wall and select Parallel shift.

  3. In the Parallel shift line dialogue box, enter a value in millimetres (mm).
    Note: Entering a + or - will determine the direction of the shift.

  4. Click OK.

 

Related articles

Split line in two (add new point)

How to offset part of an external wall

Related articles