Skip to main content

Parallel shift

Matt
  • Updated
Not yet followed by anyone

In Winner, users can move a wall, or offset, a line or an edge in a parallel direction. This is useful for making a room larger without deleting any external walls, extending a worktop or adjusting the dimensions of an interior wall. The method differs dependent on whether the line or edge being moved is part of a worktop, a filler, a sectional view, an interior (false) wall or an external wall.

 

Worktop

At Alternative level, in Furnishing mode:

  1. Click the Draw/edit worktop icon:

    draw_edit_worktop.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the worktop edge.

  4. Right-click the selected worktop edge and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimeters (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

At Alternative level, in Worktop scheme mode:

  1. Left-click to select the worktop edge.

  2. Right-click and select Parallel shift. 

  3. In the Parallel shift line dialogue box, enter a value in millimeters (mm).
    Note: Entering a + or - will determine the direction of the shift.

  4. Click OK.

 

Filler

At Alternative level, in Furnishing mode:

  1. Click the Free drawing of filler icon:

    Free_drawing_of_filler.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the filler edge.

  4. Right-click the selected filler edge and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimeters (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

Sectional view

At Alternative level, in Furnishing mode:

  1. Click the Draw/alter sectional view icon:

    EditSectionalView64.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the sectional view line.

  4. Right-click the selected sectional view line and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimeters (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

Interior (false) wall

At Alternative level, in Room definition mode or Furnishing mode:

  1. Click the Draw interior wall icon:

    Draw_interior_wall.png

  2. Click the Select tool icon:

    select_tool.png

  3. Left-click to select the interior wall edge.

  4. Right-click the selected interior wall edge edge and select Parallel shift.

  5. In the Parallel shift line dialogue box, enter a value in millimeters (mm).
    Note: Entering a + or - will determine the direction of the shift.

  6. Click OK.

 

External wall

At Alternative level, in Room definition mode:

  1. Left-click to select the external wall.

  2. Right-click the selected external wall and select Parallel shift.

  3. In the Parallel shift line dialogue box, enter a value in millimeters (mm).
    Note: Entering a + or - will determine the direction of the shift.

  4. Click OK.

 

Related articles

Split line in two (add new point)

Switch from metric system to imperial system

How to offset part of an external wall

 

Related articles