In Winner, when a user opens a new Design, they will be prompted to select a manufacturer's catalogue and a model in the Select model window. If a user clicks Cancel there will be no default supplier or model selected, this means that no catalogue information will appear above the Code box or in Drawing settings. However, a catalogue and model can still be selected.
There are two ways to select a manufacturer's catalogue and a model if no catalogue or model was initially selected.
Exit and re-enter the Design
At Design level, in any mode:
-
Click the End drawing and return to project view icon:
-
Click Yes to save any changes made, or No to disregard any changes made.
-
At Project level, select the Design and click Open drawing.
-
In Select model, select a manufacturer's catalogue and furniture model.
-
Click OK.
A second Select model window will open.
-
In Select model, select a worktop and click OK.
-
In Drawing settings, click OK.
Note: Users can also change a selected model, see Changing a Model.
Select a manufacturer's catalogue under Object
At Design level, in Furnishing mode:
-
Click the Object drop-down box, located on the far right side.
-
Select a manufacturer's catalogue.
-
Double-click the Code box, located on the far right side.
-
In the Select product window, select a unit to insert into the drawing.
-
Click OK.
The Select model window will open.
-
In Select model, select a furniture model and click OK.
A second Select model window will open.
-
In Select model, select a worktop and click OK.
-
In Drawing settings, click OK.
Note: Users can also change a selected model, see Changing a Model.
Related articles