You can have countertops with different thicknesses or 'heights' in your plan. You can do this by altering the Select model options for the specific countertop piece and selecting a new worktop thickness.
If the supplier catalogue you are using provides multiple countertop thicknesses, take the following steps to set this up:
- In your Alternative, click on the Countertop scheme mode icon in the Toolbar.
- In the Countertop codes window, ensure that the part of countertop you want a different thickness is separate to the other countertop pieces. If it isn't you will need to insert a joint to create a separate piece.
- Select the countertop piece you want to alter the thickness of.
- In the Countertop codes window click Edit at the bottom of the page and click on more options symbol next to the Model box.
- In the Select model window, click on the Countertop height or thickness drop-down and select the new option.
- Click OK to confirm.
- Click Apply at the bottom of the Countertop codes window.
Once you have made the new selection, it will be saved as an option in your plan. Right-click on a new piece of countertop and go to Change model to see the saved selection.
If the supplier catalogue you are using does not provide multiple countertop thicknesses, take the following steps to set this up:
- Select the Draw/edit countertop icon on the tool bar.
- Using the pencil draw the required countertop in the plan.
Note: dimensions can be edited after.
- Select the height position as Countertop.
- Click OK in the Object properties window.
- Select the catalogue that you require and select the code required, click OK.
- In the Select model window select the colour and thickness of the countertop.
- Click OK and the countertop will added to the plan and quotation.
Related articles
How to insert or remove a joint in a worktop