How do I remove a plinth?

In Winner, the default setting of plinths being placed under units is automatic.  You can turn off this automatic placing in the Drawing settings for all the units, or individually in the Object parameters.  

Remove Plinth for all units

1. Click on Alternative in the Menu bar and select Settings, or press F7.
   
   
2. In Drawing Settings, go to the Edges section.
   The Plinth drop-down is the first listed in Edges.
   
   
3. In the Plinth line, click on the Only drawn drop-down.
   
   
4. Select Off.
   
   
5. Click OK in the bottom left of Drawing Settings.
   Now that there is no plinth, the units will float.  Change the Height type to set to the floor.
   
   
6. Hold the shift key and click each unit to highlight.
   
   
7. Once all are selected, right-click and select Set height type.
   
   
8. In Set height position, click on the drop-down and select 0.0 On floor.
   
   
9. Click OK.

Remove Plinth on a unit

1. In the Plan window, double click on the unit you do not want a plinth on.
   
   
2. In Object parameters, scroll and find Plinth.
   
   
3. Click Plinth to highlight.  Click the drop-down at the bottom and select Off.
   Now that there is no plinth, the unit will float.  Change the Height type to set to the floor.
   
   
4. Click Height type in the box to the left.
   
   
5. Click the drop-down at the bottom and select On floor: 0.0 (, Up).
   
   
6. Click OK.

Related articles

Automatic offset from wall
How can I add plinth moulding?
Why is there plinth where I don't need it?