How do I remove a toekick?

In Winner, the default setting of toekicks being placed under units is automatic.  You can turn off this automatic placing in the Drawing settings for all the units, or individually in the Object parameters.  

Remove Toekick for all units

1. Click on Alternative in the Menu bar and select Settings, or press F7.
   
   
2. In Drawing Settings, go to the Edges section.
   The Toekick drop-down is the first listed in Edges.
   
   
3. In the Toekick line, click on the Only drawn drop-down.
   
   
4. Select Off.
   
   
5. Click OK in the bottom left of Drawing Settings.
   Now that there is no toekick, the units will float.  Change the Height type to set to the floor.
   
   
6. Hold the shift key and click each unit to highlight.
   
   
7. Once all are selected, right-click and select Set height type.
   
   
8. In Set height position, click on the drop-down and select 0.0 On floor.
   
   
9. Click OK.

Remove Toekick on a unit

1. In the Plan window, double click on the unit you do not want a toekick on.
   
   
2. In Object parameters, scroll and find Toekick.
   
   
3. Click Toekick to highlight.  Click the drop-down at the bottom and select Off.
   Now that there is no toekick, the unit will float.  Change the Height type to set to the floor.
   
   
4. Click Height type in the box to the left.
   
   
5. Click the drop-down at the bottom and select On floor: 0.0 (, Up).
   
   
6. Click OK.

Related articles

Automatic offset from wall
How can I add toekick moulding?
Why is there toekick where I don't need it?