How to add an appliance without an image to your design

For some integrated appliances the supplier catalogue does not have an image attached. For example an integrated dishwasher which would need to have the same finish applied to your design.

Follow the steps below to add such an appliance: 

In Furnishing mode

1. Ensure the cursor is placed in the correct position where you want to insert the appliance.
   
   
2. Click the Standard products button on the right-hand side of your screen.
   
   
3. Click on the arrow by Electrical Appliances.
   
   
4. Navigate to the appliance you require.
   
   
5. Click for example: Dishwasher with whole door.
   
   
6. Select the style of presentation you require and click OK.
   
   
7. In the first Select code window if necessary, using the drop-down box, change the supplier to the required catalogue for the appliance.
   Note: If a code is not required select skip. 
   
   
8. Select code for the appliance and click OK.
   
   
9. Set the parameters for the appliance and click OK.
   
   
10. In the second Select code window, select a code for the door or front panel of the integrated unit and click OK.
    Note: The Supplier catalogue will default to the one already used in the plan, this can be changed using the drop-down box.
    
    
11. The integrated unit will now be placed in the plan with a symbol on it.